top of page

Payment terminals

The Android operating terminal enables far more functions that can be gradually implemented within the store. The basic component is an application connected to an authorization system providing payments with VISA and Mastercard cards.

​

Furthermore, it is possible to implement acceptance through a direct connection to the open banking of banks via a QR code. 

Kompaktní terminál v akci

Platba magnetickou kartou

INGENICO LANDI A8

It is an intelligent mobile POS terminal APOS A8, which has a very strong performance using Qualcomm 4G mobile platforms from the well-known manufacturer Ingenico/LANDI.

It is equipped with:​

  • 5.5 inch touch screen with high resolution and brightness

  • Equipped with all payment card readers (chip / PIN, contactless cards, mobile phones, watches, etc.)

  • The touch screen is used directly to enter the PIN (it is not necessary to connect another payment terminal)

  • Receipt printer on thermal paper with a standard width of 5.8 cm

  • Communicates via a Wi-Fi network or a mobile connection using up to 4G (using a standard SIM card of a mobile operator)

  • On the top, it is equipped with a camera for reading barcodes on QR codes

  • The camera is also located on the bottom of the terminal for ideal reading of barcodes and QR codes when held in the hand. It also contains a led display that helps better reading in low-light conditions.​

LandiPLM.png

SUNMI P2

It is a modern intelligent SUNMI P2 mobile POS terminal based on the very successful P1 series of mobile POS, extended by the acceptance of payment cards on the European market using the Android operating system and fully equipped: ​

  • and powered by Quad-core processor with 1.4GH;

  • Operating memory 2GB RAM and 16GB ROM;

  • The display has a 5.99 inch; screen with a resolution of 720 x 1440 IPS;

  • The Wi-Fi interface is aligned with the IEEE 802.11 a/b/g/n standard and works both on the 2.4G/5G standard;

  • It is equipped with Bluetooth communication protocol with BLE and BT 2.1/3.0/4.2 support

  • The battery is Lithium with a capacity of 7.6V/2580mAh

  • The thermal printer has a width of 58 mm with a speed of 70 mm/s with a disc with a diameter of 40 mm.

  • It is equipped with a 1D barcode scanner

  • 5.0MP camera with illumination support and support for reading 1D and 2D barcodes.

  • It contains a GPS antenna

  • It communicates via an inserted SIM card with the support of available networks in the territory of the Czech Republic.  

 

The remaining specifications can be found here in the original version directly from the manufacturer. 

SUNMI P2 PRO Technical specification in the documentation section

​

​

SUNMIPLM.png

SmartPEAK 2000L

An ideal terminal that combines the PRICE/PERFORMANCE ratio

Contains:

  • Operating memory 1 to 8 GB

  • with expansion up to 32GB

  • The display is 5.5 inches; and the screen has a resolution of 720 x 1440 IPS

  • The Wi-Fi interface is aligned with the IEEE 802.11 a/b/g/n standard and works both on the 2.4G/5G standard;

  • It is equipped with Bluetooth communication protocol with BLE and BT 2.1/3.0/4.2 support

  • The thermal printer has a width of 58 mm with a speed of 70 mm/s with a disc with a diameter of 40 mm.

  • Android 9 and above operating system. 

SMARTPEAKPLM.png
bottom of page